Toilet Repair Greenwood Village

Your toilet may need repairing if it exhibits any of the following characteristics: the water runs constantly, it clogs with great frequency, it flushes weakly (if at all), or water is leaking around its base. You might notice that the toilet is making some unusual sounds, or has developed some cracks in the porcelain, or is otherwise looking quite odd. And if your water bill has spiked recently, it could be that your toilet is leaking in a way that's not obvious (i.e., not showing up as a nice steady stream or puddle around the base). Prompt repair cuts down on the water waste and damage that could develop into something worse.

Most of the time, a running toilet is a result of a bad flapper that just isn't sealing right. But it could also be due to a bad fill valve or an improperly set float. Fortunately, the float, the fill valve, and the flapper are all repairable (again, with pliers, a Phillips screwdriver, and a small amount of patience). Or you could simply call in a plumber if any of this seems too wonky for you.

You can test for a toilet leak by putting some food coloring in the tank and watching for a color change in the toilet bowl. If the color seeps into the bowl, you have a leak. Also, check for pooling water around the base of the toilet; this might suggest that the wax seal is failing and that water is seeping out. These tests should be performed regularly (though I won't impose a set schedule on you) to ensure that the toilet does not waste water.

When a toilet flushes and makes a gurgling noise, it usually means there is a partial blockage in the toilet or the venting system. It can also indicate some more complex problem within the sewer line. In rare cases, the municipal sewer system may be having issues and thus cause toilets to gurgle. If your toilet gurgles, it is best to consult with a Greenwood Village, Colorado plumber who can help you with both identifying the problem and making necessary repairs.

When a toilet plunger fails to remove a clog, the next instrument to try is a toilet auger. Bowers's plunger left the stool in the toilet, so the auger needed to reach deeper into the drain. Three things could block the drain in a toilet. The first is a natural blockage, like a buildup of sl.n.mnk., l.n.3, or.o in the drain over time. The second is that the drains themselves are improperly designed, either by having too sharp a turn or being too narrow for the amount of material that passes through. The third is that the material passing through the drain isn't flowing.

The flapper, fill valve, and flush valve are generally rated for a life span of 3-5 years. This is a fairly wide range, but it allows for variability in usage and, more importantly, in the quality of the water that flows through the toilet. Regular inspections of the tank's components can help spot trouble before it spots you. Look for things like discoloration and corrosion, especially in the flush valve and fill valve. Maintenance of toilet tank components is the best way to achieve optimal performance and prevent the kind of unexpected issues that can cause you to lose sleep (or at least be up in the middle of the night calling a plumber).

You might be able to repair a minor hairline crack in a toilet bowl or tank, using a special epoxy or sealant, but it's really not effective for long. If you have a significant crack in a toilet that is causing it to leak, go ahead and get the thing replaced. Otherwise, you might come home one day to a failed tank, and by the way, a toilet with a significant crack in it can waste an awful lot of water. If it were me, I would consult with a plumbing professional to make the determination of repair vs. replace.

Certainly! An effective way to increase the water efficiency of your home is to take care of certain plumbing problems, such as leaks or a toilet that runs nonstop. Plumbing issues that affect water pressure not only waste a tremendous amount of water but also cost you money. Refixing simple leaks and replacing old toilet models can save you and the environment a significant amount of money. On top of it all, these repairs can actually enhance the efficiency of your home.

How much does it cost to have a toilet repaired by a professional? The answer is somewhat complicated because it all depends on what is wrong with the toilet and how much work a plumber has to do to fix it. If the problem is simple, the solution might cost you less than $150. If you have an intricate issue going on, then you might end up paying $300 or more. And remember, a good plumber is worth his or her weight in, well, gold (since they ensure you won't have future problems that could cost you even more in the long run).

To maintain your toilet and avoid constant repairs, you must perform regular upkeep. This means more than just giving the bowl a good scrub. You will need to disassemble the tank, clean the parts, and reassemble the tank if you want to maintain your toilet properly and avoid the situation that several acquaintances of mine have faced: frequent, unexpected, and surprise toilet repairs. Don't be shy; the tank is your toilet's engine. Give it a spa day, and do so on a regular schedule. The potential problems that a diligent inspection might uncover are manifold, and I will discuss them next.