Drain Cleaning Lone Tree

Typically, clearing a drain in Lone Tree will set you back between $100 and $300. However, this is subject to fluctuation due to several factors. The nature of the clog, for instance—how bad it is and where exactly it's located—plays a huge part in determining the final bill. So does the choice of service; different professional outfits have different rate structures, and some are just plain better than others. Still others are good at what they do, but only when the sun is shining. Services that must be interrupted for the sake of a rainstorm obviously can't work in the rain, and those that work in the rain must charge a premium.

To ensure that your plumbing stack is performing optimally and preventing annoying blockages, it should be cleaned every 18 to 22 months. This is maintenance, not repair, and the number of months could be fewer (or more) depending on the quantity and quality of the plumbing stack's recent usage. So, since we all have unique plumbing systems, it would be best to ask a local plumbing pro for personalized advice on how frequently to clean yours.

To unclog drains, plumbers usually rely on a high-quality liquid known as a hydro-jetting solution or an enzyme-based drain cleaner. These products are formulated to work on the kinds of tough organic clogs that you find in a drain—things like hair and other bathroom debris, the kinds of things that are just not supposed to be in your working pipes. For even tougher jobs, a plumber might pull out the big guns and use a chemical drain cleaner with really strong acids or bases in it. But mostly, if you're a plumber, you're using the safer, more environment-friendly products that do the job without too much fuss.

Roto-Rooter unclogs drains using a variety of methods, depending on the type and severity of the clog. They usually start with a motorized drain auger or snake, a flexible cable that can navigate through the pipes to dislodge and break apart the kind of up-close-and-personal obstructions that often stop up pipes. For more serious work, Roto-Rooter may use high-powered water jetting, a method that basically amounts to a pressure-washing of the inside of the pipe. Alternatively, they might send a tiny camera into the pipe to find the problem. Is any one of these methods effectively a secret? No. Most of them are standard procedure when clearing clogs from a drain.

Using a combination of baking soda and vinegar is one of the most inexpensive methods for clearing a clogged drain. Start by dispensing approximately 0.5 cups of baking soda into the drain. Follow that with an equal amount of vinegar. Let the mixture do its thing for about 15 minutes. Finally, use hot water to finish the job.

How long does it take a plumber to clear a drain? That can vary—of course—based on several factors. If we were to consider a median type blockage, say a simple clog, I would say you could expect a drain-clearing time of about 30 minutes to 1 hour max. Yet, if the blockage were more severe or located in a less accessible part of the system (say, the main sewer), the time to clear that blockage could be several hours or more.

To unblock drains, plumbers use a number of tools and methods. Sometimes they use something called a drain snake or auger, which is an incredibly strong tool that can be pushed down into the pipe. Hydro jetting equipment shoots a powerful stream of water into the clogged pipe. Other tools, of course, can be employed. Yet no matter the tool, it is imperative for the plumber to know what is causing the blockage and where the blockage is located. Plumbers today often use video inspection equipment to get this crucial information.

Unclogging a drain can be a simple task, but when it is not done correctly, it can lead to the kind of problems that really drain (pun intended) your resources. That's why you want to be sure to use the correct method for your situation. Drain snakes and plungers can be quite effective in the right hands, but not every blockage is going to yield to those simple tools. When you have the kind of blockage that is not going to yield, you need to call in the pros.

Most drainage systems, including PVC and metal plumbing, as well as vintage plumbing, should be safe from harm if Drano Max Gel is used according to directions. That said, the gel's chemical makeup could mean that using it a lot or too often might weaken your pipes over time. You're probably best off sticking with the regular maintenance methods that the manufacturer endorses—and considering all these factors, we think the next maintenance method might be a good alternative.

When faced with a clogged drain, most homeowners will first try to clear it themselves. This often involves the rudimentary tools of the trade: a plunger or, if that fails, a snake. They may also pour an assortment of “natural” or “eco-friendly” drain cleaners down the sink. (Most drain cleaners are not as friendly to the environment as they claim.) If the drain is still clogged after these concerted efforts, it is time to call in a professional. A plumber will begin with the same basic diagnosis you would do yourself: Is the problem localized to this drain, or is it part of a larger drainage-system issue? They will check first for basic, blockage-causing problems and then move on to any more serious, underlying issues that could cause a recurrence.